Structural features:
100C Angle type pneumatic sludge discharge valve is suitable for water treatment plant, used for discharging sludge and wastewater in pool. This valve is an angular structure, the partition plate divides the inner cavity into two parts: the control cavity and the flow path, and the control cavity is divided into the upper and lower control cavities by the diaphragm. The valve seat is a flat-bottomed structure with ceramic sprayed on the sealing surface, which is extremely resistant to abrasion and corrosion, and prevents sludge from accumulating garbage for long-term use. The top of the valve cover and the side of the valve body are reserved with screw holes, the pressure source through the control line in and out of the upper and lower control chambers respectively. Through the solenoid valve to control the upper and lower chamber pressure and control the sludge discharge valve to open or close, when there is an accident of the sudden disappearance of the control air source, the sludge discharge valve can be kept closed under the inlet water pressure. (External pressure control source is gas source)
Technical Parameters:
PM747X Main Dimensions (mm) | ||||||||||
DN | D | ΦK | C | F | N | Φd | ΦF | H1 | H2 | ح |
DN150 | 285 | 240 | 19 | 3 | 8 | 23 | 340 | 410 | 225 | 143 |
DN200 | 340 | 295 | 20 | 3 | 8 | 23 | 435 | 501 | 275 | 200 |
DN250 | 395 | 350 | 22 | 3 | 12 | 23 | 536 | 610 | 325 | 238 |
DN300 | 445 | 400 | 24.5 | 4 | 12 | 23 | 640 | 705 | 375 | 285 |